Search FAQ

Use the drop down menu to select a category and product. You may also use the search bar to search our knowledge base.

 

 

 

My studio already has some acoustical treatment. Will ARC be useful for me?
Can I use ARC System with my system output on Windows or Mac?
Is ARC 3 Compatible with macOS 10.15 Catalina?
Am I applying an additional EQ to the monitoring when I edit the target curve to my taste by dragging the EDIT points on the graph?
Why do I have such a versatile metering section on this plug-in that is used to calibrate a monitoring system?
High and Low correction ranges. Why should I want to limit the correction on a smaller range than the whole audio spectrum?
When should I use NATURAL and LINEAR phase modes?
When I insert the plug-in and load my Measurement, I have a strong level decrease on my monitors.
How should I use the correction plug-in in my DAW?
Is the quality of the audio interface and mic preamp used for the room analysis important for the results accuracy?
I have a 2+1 system that includes a subwoofer, how should I measure the room?
There is a considerable level of background noise in my studio, can I measure the room reliably?
What is the best playback level I should set my listening level to when measuring the room?
Should I keep doors and windows closed while analyzing the room?
Can I stay in the room while the Analysis process is recording each point?
Should I use a mic stand for the measurement process?
Is the accuracy of the mic positioning during measurement affecting the quality of the results?
Is it mandatory to load calibration files for the generic measurement microphone option?
I have recording condenser microphone that can be set to “omni” and has a remarkably flat frequency response. Can I use it with ARC 3?
I have seen that ARC 3 support 3rd parties “measurement microphones”. What exactly is a measurement mic and what is a microphone calibration file?
Are the older ARC microphones (silver metal models) still good for ARC 3?
What is the best microphone to use with ARC 3?
Can I use previous room-measurements I made with previous versions with ARC 3?
Why Aren't Any of My ARC 3 Measurements Appearing?
No Microphone Signal in the Analysis App
macOS Mojave (10.14) & Catalina (10.15) Permissions Explained

Here are our current trending articles:

 

HARDWARE

My studio already has some acoustical treatment. Will ARC be useful for me?
Can I use ARC System with my system output on Windows or Mac?
Is ARC 3 Compatible with macOS 10.15 Catalina?
Am I applying an additional EQ to the monitoring when I edit the target curve to my taste by dragging the EDIT points on the graph?
Why do I have such a versatile metering section on this plug-in that is used to calibrate a monitoring system?
High and Low correction ranges. Why should I want to limit the correction on a smaller range than the whole audio spectrum?
When should I use NATURAL and LINEAR phase modes?
When I insert the plug-in and load my Measurement, I have a strong level decrease on my monitors.
How should I use the correction plug-in in my DAW?
Is the quality of the audio interface and mic preamp used for the room analysis important for the results accuracy?
I have a 2+1 system that includes a subwoofer, how should I measure the room?
There is a considerable level of background noise in my studio, can I measure the room reliably?
What is the best playback level I should set my listening level to when measuring the room?
Should I keep doors and windows closed while analyzing the room?
Can I stay in the room while the Analysis process is recording each point?
Should I use a mic stand for the measurement process?
Is the accuracy of the mic positioning during measurement affecting the quality of the results?
Is it mandatory to load calibration files for the generic measurement microphone option?
I have recording condenser microphone that can be set to “omni” and has a remarkably flat frequency response. Can I use it with ARC 3?
I have seen that ARC 3 support 3rd parties “measurement microphones”. What exactly is a measurement mic and what is a microphone calibration file?
Are the older ARC microphones (silver metal models) still good for ARC 3?
What is the best microphone to use with ARC 3?
Can I use previous room-measurements I made with previous versions with ARC 3?
Why Aren't Any of My ARC 3 Measurements Appearing?
No Microphone Signal in the Analysis App
macOS Mojave (10.14) & Catalina (10.15) Permissions Explained

 

SOFTWARE

My studio already has some acoustical treatment. Will ARC be useful for me?
Can I use ARC System with my system output on Windows or Mac?
Is ARC 3 Compatible with macOS 10.15 Catalina?
Am I applying an additional EQ to the monitoring when I edit the target curve to my taste by dragging the EDIT points on the graph?
Why do I have such a versatile metering section on this plug-in that is used to calibrate a monitoring system?
High and Low correction ranges. Why should I want to limit the correction on a smaller range than the whole audio spectrum?
When should I use NATURAL and LINEAR phase modes?
When I insert the plug-in and load my Measurement, I have a strong level decrease on my monitors.
How should I use the correction plug-in in my DAW?
Is the quality of the audio interface and mic preamp used for the room analysis important for the results accuracy?
I have a 2+1 system that includes a subwoofer, how should I measure the room?
There is a considerable level of background noise in my studio, can I measure the room reliably?
What is the best playback level I should set my listening level to when measuring the room?
Should I keep doors and windows closed while analyzing the room?
Can I stay in the room while the Analysis process is recording each point?
Should I use a mic stand for the measurement process?
Is the accuracy of the mic positioning during measurement affecting the quality of the results?
Is it mandatory to load calibration files for the generic measurement microphone option?
I have recording condenser microphone that can be set to “omni” and has a remarkably flat frequency response. Can I use it with ARC 3?
I have seen that ARC 3 support 3rd parties “measurement microphones”. What exactly is a measurement mic and what is a microphone calibration file?
Are the older ARC microphones (silver metal models) still good for ARC 3?
What is the best microphone to use with ARC 3?
Can I use previous room-measurements I made with previous versions with ARC 3?
Why Aren't Any of My ARC 3 Measurements Appearing?
No Microphone Signal in the Analysis App
macOS Mojave (10.14) & Catalina (10.15) Permissions Explained

 

MOBILE APPS

My studio already has some acoustical treatment. Will ARC be useful for me?
Can I use ARC System with my system output on Windows or Mac?
Is ARC 3 Compatible with macOS 10.15 Catalina?
Am I applying an additional EQ to the monitoring when I edit the target curve to my taste by dragging the EDIT points on the graph?
Why do I have such a versatile metering section on this plug-in that is used to calibrate a monitoring system?
High and Low correction ranges. Why should I want to limit the correction on a smaller range than the whole audio spectrum?
When should I use NATURAL and LINEAR phase modes?
When I insert the plug-in and load my Measurement, I have a strong level decrease on my monitors.
How should I use the correction plug-in in my DAW?
Is the quality of the audio interface and mic preamp used for the room analysis important for the results accuracy?
I have a 2+1 system that includes a subwoofer, how should I measure the room?
There is a considerable level of background noise in my studio, can I measure the room reliably?
What is the best playback level I should set my listening level to when measuring the room?
Should I keep doors and windows closed while analyzing the room?
Can I stay in the room while the Analysis process is recording each point?
Should I use a mic stand for the measurement process?
Is the accuracy of the mic positioning during measurement affecting the quality of the results?
Is it mandatory to load calibration files for the generic measurement microphone option?
I have recording condenser microphone that can be set to “omni” and has a remarkably flat frequency response. Can I use it with ARC 3?
I have seen that ARC 3 support 3rd parties “measurement microphones”. What exactly is a measurement mic and what is a microphone calibration file?
Are the older ARC microphones (silver metal models) still good for ARC 3?
What is the best microphone to use with ARC 3?
Can I use previous room-measurements I made with previous versions with ARC 3?
Why Aren't Any of My ARC 3 Measurements Appearing?
No Microphone Signal in the Analysis App
macOS Mojave (10.14) & Catalina (10.15) Permissions Explained

 

SALES & OTHER

My studio already has some acoustical treatment. Will ARC be useful for me?
Can I use ARC System with my system output on Windows or Mac?
Is ARC 3 Compatible with macOS 10.15 Catalina?
Am I applying an additional EQ to the monitoring when I edit the target curve to my taste by dragging the EDIT points on the graph?
Why do I have such a versatile metering section on this plug-in that is used to calibrate a monitoring system?
High and Low correction ranges. Why should I want to limit the correction on a smaller range than the whole audio spectrum?
When should I use NATURAL and LINEAR phase modes?
When I insert the plug-in and load my Measurement, I have a strong level decrease on my monitors.
How should I use the correction plug-in in my DAW?
Is the quality of the audio interface and mic preamp used for the room analysis important for the results accuracy?
I have a 2+1 system that includes a subwoofer, how should I measure the room?
There is a considerable level of background noise in my studio, can I measure the room reliably?
What is the best playback level I should set my listening level to when measuring the room?
Should I keep doors and windows closed while analyzing the room?
Can I stay in the room while the Analysis process is recording each point?
Should I use a mic stand for the measurement process?
Is the accuracy of the mic positioning during measurement affecting the quality of the results?
Is it mandatory to load calibration files for the generic measurement microphone option?
I have recording condenser microphone that can be set to “omni” and has a remarkably flat frequency response. Can I use it with ARC 3?
I have seen that ARC 3 support 3rd parties “measurement microphones”. What exactly is a measurement mic and what is a microphone calibration file?
Are the older ARC microphones (silver metal models) still good for ARC 3?
What is the best microphone to use with ARC 3?
Can I use previous room-measurements I made with previous versions with ARC 3?
Why Aren't Any of My ARC 3 Measurements Appearing?
No Microphone Signal in the Analysis App
macOS Mojave (10.14) & Catalina (10.15) Permissions Explained

 

SPECIAL OFFERS4 THIS MONTH
Loading...