T-RackS Stealth Limiter is an ultra-transparent mastering peak limiter. It's a versatile sonic ninja of a mixing and mastering tool that features an advanced inter-sample peak limiting algorithm that lets you turn up the loudness of your mixes while still maintaining a clean a sound that’s full of dynamic range and sonic breathing room. T-RackS Stealth Limiter is your new go-to mastering peak limiter when you want impressive loudness without the damaging side effects of traditional processors.
The past few decades have seen volume levels rise at an alarming rate. Loudness of mixed and mastered audio material has become a de-facto standard for contemporary music production. This quest for loudness has come at a significant cost — as producers and engineers strive to remain competitive they employ methods of extreme compression and limiting that, though they make a mix louder, also impart an unmistakable mark of residual distortion, sonic flatness and loss of overall emotion. When used heavily, these processors flatten out the music’s dynamics and get rid of much of the music’s magic and emotion when passing between various sections of a song. Our goal was to provide a new kind of processor for the final peak limiting stage of the mastering process that’s able to impart loudness while maintaining more perceived dynamic range than other limiters and compressors.
T-RackS Custom Shop Stealth Limiter
At a basic level, T-RackS Stealth Limiter provides an impressive increase in loudness without the discernable effects of compression. Simply put, it’s the most transparent, clear and loud software mastering peak limiter available. And this is all thanks to its smart level-tracking algorithm. It works under the hood to reduce levels below the volume ceiling moment-by-moment instead of applying traditional look-ahead envelope-based fast attack compression. This algorithm doesn’t sound like a compressor, and that’s because it’s not a compressor! T-RackS Stealth Limiter’s algorithm tracks the level and keeps it under control while simultaneously preserving the perceived sense of dynamics.
With traditional mastering processes, it’s normal to push the volume level towards a -0.1dB or even 0.0dB ceiling. Spikes above this ceiling are suppressed via the use of hard limiters and clippers. Yet these methods only ensure a stable digital level, they do not guarantee undistorted playback once the music is translated into an analog signal. This is because the process of playback involves a number of conversion processes that, though the digital waveform may be below 0.0dB, can cause the analog waveform to exceed this threshold and introduce unwanted distortion and fuzz.
T-RackS Stealth Limiter features an inter-sample peak-limiting algorithm that gets around this issue by predicting the converted analog waveform of the digital source. Through this process it’s able to limit the sound in a way that ensures the final converted audio will very rarely exceed the set ceiling. This is useful in the modern era where music is often heard on different devices and via different services that all deliver their music via compressed formats, like MP3 or AAC.
Using T-RackS Stealth Limiter couldn't be easier. It sports straightforward controls and intuitive features that let you apply its powerful processing to your mixes quickly and effectively. Just use the input knob to set the input level to your desired loudness, and then adjust the output level with its output ceiling knob. Want to take things further? Don’t worry, we’ve got you covered…
T-RackS Stealth Limiter gives you a suite of advanced controls that are custom tailored for fine-tuning. It sports 4 modes that can each be used for a different mastering purpose:
TIGHT This is T-RackS Stealth Limiter’s default mode, and it’s most neutral. It respects the source material’s natural sonic dynamics the most. Even when set to the highest limiting setting, the music will never sound “compressed” or “constrained.” With this setting, you can increase loudness while maintaining a neutral effect on sonic timbre and dynamics.
BALANCED Like its name suggests, this is a more balanced process that can be used when a small amount of dynamic compression is acceptable (or desirable). The difference between this mode and TIGHT is so subtle that the two are only distinguishable at high loudness levels and with extreme limiting.
HARMONICS 1 Though designed to be ultra-transparent, T-RackS Stealth Limiter can also be used in this mode to add a dash of harmonic coloration and sonic enrichment to the processed audio. When engaged it conveys a sense of dimension and pleasant coloration to your mix that will make it sound and feel more analog.
HARMONICS 2 Similar to HARMONICS 1, this mode is also used for adding a bit of sonic character. The difference though is that HARMONICS 2 lets you add some grit and punch when you feel that your music is weak or needs a more thorough boost of analog character.
In addition to these modes, you also get an on-board unity gain monitoring function that lets you listen to your mix's processed audio without the accompanying increase in volume. This makes it easy to instantly compare processed and unprocessed audio so that you can ensure you avoid the "louder is better" pitfall. T-RackS Stealth Limiter also comes with an infrasonic filter (a 22Hz, 4th order high pass filter) that can be engaged to cut out unwanted sub-bass frequencies from your mix that could put excessive workload on the limiter. Combine these advanced features with T-RackS Stealth Limiter’s ability to transparently provide mix loudness, and you have a secret weapon of a mastering tool that you’ll find yourself reaching for again and again..
Hear the difference for yourself. We've created 3 demo tracks: Pop, EDM and Crossover Rock. And then we ran them through the T-RackS Stealth Limiter and also 4 of the most popular and acclaimed “competing” limiters on the market: There's a $350 competitor, a $300 competitor, a $249 competitor and a $169 competitor. We've used the same gain settings on each track, with +8dB for the Pop track, +11.5dB for the EDM track and +6dB for the Crossover Rock track.
Pop track: +8dB
Unprocessed
Stealth Limiter
350 USD Competitor
300 USD Competitor
249 USD Competitor
169 USD Competitor
EDM track: +11.5dB
Crossover Rock track: +6dB
In all cases, it should become apparent that T-RackS Stealth Limiter easily outperforms the competition. In fact, you could say that the T-RackS Stealth Limiter really doesn’t have any competition — you’ll notice the dynamics of the tracks are less flattened and more respected. This is clearly noticable with the Pop Song, where strong emotional contrasts occur when passing between verse and chorus passages. On the Crossover Rock track, T-RackS Stealth Limiter maintains the attack of the drums — a nuance that's lost by other limiters to varying degrees. And, on the EDM track, T-RackS Stealth Limiter's invisible touch means that the punch and perceived impact is much higher. No matter the situation, T-RackS Stealth Limiter simply sounds cleaner, more open and more detailed than any other limiter currently on the market.
Dyna-Mu
Vintage Tube Compressor/Limiter Model 670
Bus Compressor
Opto Compressor
Precision Comp/Limiter
This audio processor module is part of T-RackS CS "Custom Shop" Mixing and Mastering Plug-In Collection. With T-RackS CS you can:
Read more about T-RackS CS
*Legal detail
T-RackS® is a registered trademark property of IK Multimedia Production. All other product names and trademarks are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia. Product names are used solely for the purpose of identifying the specific products that were studied during IK Multimedia’s sound model development and for describing certain types of tones produced with IK Multimedia’s digital modeling technology. Use of these names does not imply any cooperation or endorsement. LA-2A and 1176 LN are registered trademarks of Universal Audio, Inc. IK Multimedia's products, specifically, the T-RackS 3 Black 76 Limiting Amplifier and T-RackS 3 White 2A Leveling Amplifier, are manufactured and developed by IK Multimedia based on its own modeling techniques. Universal Audio has neither endorsed nor sponsored IK Multimedia's products in any manner, nor licensed any intellectual property for use in this product. Leslie is a trademark property of Hammond Organ/Leslie, wholly-owned brand subsidiaries of Suzuki Musical Instruments Mfg., Ltd. of Hamamatsu, Japan, used under license. Fairchild® is a registered trademark property of Avid Technology, Inc. Pultec® is a registered trademark property of Pulse Techniques, LLC. Mac and the Mac logo are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Windows Vista and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license therefrom. The Audio Units logo is a trademark of Apple Computer, Inc. VST is a trademark of Steinberg Media Technologies GmbH. ARC System™ is a trademark property of IK Multimedia Production Srl. Audyssey™, MultEQ®, Audyssey MultEQ® are trademarks property of Audyssey Laboratories™ Inc. used under license.