iRig Micro Amp

Specs

iRig Micro Amp Specifications

Common

Speaker: 1x4” full range
Output power: 15W (DC IN powered) or 7.5W (battery powered)

Power supply

Power: battery power (6xAA - included), or DC power supply (9V-15V DC, from 1500mA up, negative inside - not included)
Battery duration: approx. 15h with 6xAA alakline
DC IN: 9V-15V DC negative inside

USB Interface

Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Device Connection: micro-USB

Instrument Input

Connector: unbalanced, Hi-Z, TS 1/4” Jack. Tip: signal / Shield: ground
Instrument Input Level: from 30mVpp to 6.9Vpp
Instrument Input Impedance: 1MOhms
Frequency response: 20 Hz – 20kHz +/-1.5dB

Stereo Headphone Output

Connector: 1/8” TRS Jack. Tip: right / Ring: left / Shield: ground

External Speaker Output

Connector: 1/4” TS Jack
Load impedance: from 4 to 16 Ohms

Dimensions and weight

Dimensions: 210mm x 125mm x 155mm
Weight: 1.26kg

Package includes

iRig Micro Amp
Lightning to micro-USB cable 60cm
USB A to micro-USB cable 60 cm
6 x 1.5V AA battery
3/8"-16 male to 5/8"-27 female mic stand thread adapter

Compatibility

iOS Devices

Compatible with iPhone X, iPhone 8 Plus, iPhone 8, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd Generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st Generation), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. iOS 6 or later is required.

Also compatible with all newer iPhone, iPad and iPod touch models.

Computers

Mac®: macOS® 10.6 or later. One free USB port required.

Windows®: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed. Download the iRig ASIO driver here.

*Legal detail | Warranty